This sample is associated with a spiked sample result that was above the high calibrant. The spike recovery was calculated using an extrapolated value.
Analytical procedure error. Initial sample aliquot (100ml) did not completely filter within the 10 minutes allowed by the method. A new filter was used and a smaller aliquot of sample was poured off and analyzed as a retest.
PJ1
Sample Site: PJ1 • Sample Id: G-2104368-01 • Analyte: BOD
Sample Site
PJ1
Sample Id
G-2104368-01
Analyte
BOD
Sample Date
2021-12-01T00:00:00.000
Qualifier
Result is associated with a calibration check that fails the requirement. All other calibration QC, including the analytical QC, was satisfactory.
This sample is associated with a spiked sample result that was above the high calibrant. The spike recovery was calculated using an extrapolated value.