Over Dimensional Vehicle Permits (ODVP) - Permit Stipulations

370588

603

YMSI-20171019-42280

Master 6 14

Please observe and follow the following travel stipulations below as they apply to the dimensions of the vehicle/load combination in your application, accordingly, and please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures: 1. (167) Vehicles over 10ft wide must have two steady marker lights at each end of the load, amber in the front and red in the back and 1 flashing amber light on the cab and one flashing amber on the back of the vehicle. 2. (168) Vehicles over 10 ft 6 in wide and/or 65ft long must have a rear escort vehicle equipped with reflective OVERSIZED LOAD signs. 3. (169) Vehicles over 14 feet wide, 100 feet long, 14 feet high and/or more than 100,000 lbs. GVW must have both a lead and a rear escort vehicle with reflective Oversized Load signs on both escort and load vehicles. ***** At 14 feet high or greater the lead vehicle must have a proper height pole attached.4. (170) Vehicles over 55 ft long must have clearance lights at 20 ft intervals along both sides of this vehicle when traveling at night 5. (171) Vehicles over 13 feet, 6 inches high, 14 feet wide, and/or 80 feet long must have a warning sign and two steady yellow lights attached to the rear of the load 6. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370588

676

YMSI-20171019-42280

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370589

19

YMSI-20171019-42282

Overhang stip

THE TRANSPORT OF UTILITTY POLES-STEEL CONSTRUCTION GIRDERS AND THE LIKE-LEADS MUST INCLUDE A TOWING VEHICLE AND A CHASE VEHICLE.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST HAVE AMBER REVOLVING LIGHTS VISIBLE FROM AT LEAST 1,000 FEET.AMBER REVOLVING OR STROBE LIGHTS MUST BE PLACED ON THE POLES/GIRDERS/LEADS.AN AMBER REVOLVING LIGHT MUST BE MOUNTED ON TOP OF THE REAR OF THE POLES.A LIGHT BAR INDICATING BRAKING AND TURNING MOVEMENTS MUST BE AFFIXED TO THE REAR OF THE POLE.IT MUST INCLUDE TWO STANDARD ORANGE FLAGS AS WELL AS REFLECTIVE STRIPPING.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST BE EQUIPPED WITH SIGNS INDICATING (OVERSIZE LOAD); THESE SIGNS MUST BE AFFIXED TO THE FRONT OF THE FRONT OF THE TOWING VEHICLE AND THE REAR OF THE CHASE VEHICLE.WHEN CROSSING A STRUCTURE, MUST STAY IN FAR RIGHT LANE, AND IF VEHICLE AND LOAD IS HEAVY SHOULD BE TRAVELING 10-15 MILES PER HOUR.

370629

595

MS26-20171018-42043

film April 14

Film Industry vehicles are not permitted on Brooklyn Bridge. Film Industry vehicles must follow and obey all posted signs along the route regarding height restrictions, speed, weight, etc - - as well as all NYC Traffic Rules and Regulations. Film Industry vehicles must obtain all necessary permits from other agencies such as Port Authority, NYSDOT, TBTA, etc. as applicable. Permittee is responsible for any repair for damage incurred caused by proposed crossing operations. Any change in the vehicle configuration on the application is not permitted.

370589

603

YMSI-20171019-42282

Master 6 14

Please observe and follow the following travel stipulations below as they apply to the dimensions of the vehicle/load combination in your application, accordingly, and please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures: 1. (167) Vehicles over 10ft wide must have two steady marker lights at each end of the load, amber in the front and red in the back and 1 flashing amber light on the cab and one flashing amber on the back of the vehicle. 2. (168) Vehicles over 10 ft 6 in wide and/or 65ft long must have a rear escort vehicle equipped with reflective OVERSIZED LOAD signs. 3. (169) Vehicles over 14 feet wide, 100 feet long, 14 feet high and/or more than 100,000 lbs. GVW must have both a lead and a rear escort vehicle with reflective Oversized Load signs on both escort and load vehicles. ***** At 14 feet high or greater the lead vehicle must have a proper height pole attached.4. (170) Vehicles over 55 ft long must have clearance lights at 20 ft intervals along both sides of this vehicle when traveling at night 5. (171) Vehicles over 13 feet, 6 inches high, 14 feet wide, and/or 80 feet long must have a warning sign and two steady yellow lights attached to the rear of the load 6. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370589

676

YMSI-20171019-42282

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370590

17

YMSI-20171019-42374

Eng stip

Please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370632

595

MS26-20171018-42041

film April 14

Film Industry vehicles are not permitted on Brooklyn Bridge. Film Industry vehicles must follow and obey all posted signs along the route regarding height restrictions, speed, weight, etc - - as well as all NYC Traffic Rules and Regulations. Film Industry vehicles must obtain all necessary permits from other agencies such as Port Authority, NYSDOT, TBTA, etc. as applicable. Permittee is responsible for any repair for damage incurred caused by proposed crossing operations. Any change in the vehicle configuration on the application is not permitted.

370739

17

YMSI-20171019-42249

Eng stip

Please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370590

431

YMSI-20171019-42374

Manhat Br LL

Crane must occupy the three lanes on the L.L. of Manhattan Bridge (Close the Bridge Lower Level Roadway for 400 ft). The permitted crane must move with Crawl Speed not more than 5 mph on bridge. It is recommended to maintain same speed and not apply brake when crane is crossing the bridge. The crane must use the lower Roadway on Manhattan Bridge, this approval is not valid for the upper Roadway of Manhattan Bridge. Do not travel over the bridge if the winds exceed 30 mph. The Crane must be escorted by vehicles weighting not more than 5000 pounds, 200 ft behind the crane. The crane is responsible to keep 200 feet behind the flow traffic. All Vehicles including NYC police shall not be allowed within 200 ft behind and 200 ft in front of the crane on the bridge. Permittee is responsible for any repair for damage incurred to the bridge structure and any appurtenances caused by proposed crossing operation. Follow all posted signs on and before the bridges such as weight, height, speed limit, etc. Follow all applicable procedures with regard to conforming to any constraints in geometric (height, length, etc.) of the roadways on their selected route and obtain any other permit if required. It is also recommended to take approval from other appropriate agencies such as Bureau of Traffic and Safety, Street(s) / Roadways, NYSDOT, etc., and follow their suggested recommendations. No substitution will be allowed for the proposed crane, and prior approval for any modification on the transporting crane. Axles weight should be transferred to each axle as per the attached information. Note: approval of the above mentioned crane on the subject bridge does not in any way predispose the permittee of the responsibility for any damage done to the bridge structural integrity, due to this move.

370590

676

YMSI-20171019-42374

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370591

595

MS26-20171018-41905

film April 14

Film Industry vehicles are not permitted on Brooklyn Bridge. Film Industry vehicles must follow and obey all posted signs along the route regarding height restrictions, speed, weight, etc - - as well as all NYC Traffic Rules and Regulations. Film Industry vehicles must obtain all necessary permits from other agencies such as Port Authority, NYSDOT, TBTA, etc. as applicable. Permittee is responsible for any repair for damage incurred caused by proposed crossing operations. Any change in the vehicle configuration on the application is not permitted.

370592

19

YMSI-20171019-42307

Overhang stip

THE TRANSPORT OF UTILITTY POLES-STEEL CONSTRUCTION GIRDERS AND THE LIKE-LEADS MUST INCLUDE A TOWING VEHICLE AND A CHASE VEHICLE.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST HAVE AMBER REVOLVING LIGHTS VISIBLE FROM AT LEAST 1,000 FEET.AMBER REVOLVING OR STROBE LIGHTS MUST BE PLACED ON THE POLES/GIRDERS/LEADS.AN AMBER REVOLVING LIGHT MUST BE MOUNTED ON TOP OF THE REAR OF THE POLES.A LIGHT BAR INDICATING BRAKING AND TURNING MOVEMENTS MUST BE AFFIXED TO THE REAR OF THE POLE.IT MUST INCLUDE TWO STANDARD ORANGE FLAGS AS WELL AS REFLECTIVE STRIPPING.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST BE EQUIPPED WITH SIGNS INDICATING (OVERSIZE LOAD); THESE SIGNS MUST BE AFFIXED TO THE FRONT OF THE FRONT OF THE TOWING VEHICLE AND THE REAR OF THE CHASE VEHICLE.WHEN CROSSING A STRUCTURE, MUST STAY IN FAR RIGHT LANE, AND IF VEHICLE AND LOAD IS HEAVY SHOULD BE TRAVELING 10-15 MILES PER HOUR.

376799

17

BSLQ-2017121-48197

Eng stip

Please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370592

603

YMSI-20171019-42307

Master 6 14

Please observe and follow the following travel stipulations below as they apply to the dimensions of the vehicle/load combination in your application, accordingly, and please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures: 1. (167) Vehicles over 10ft wide must have two steady marker lights at each end of the load, amber in the front and red in the back and 1 flashing amber light on the cab and one flashing amber on the back of the vehicle. 2. (168) Vehicles over 10 ft 6 in wide and/or 65ft long must have a rear escort vehicle equipped with reflective OVERSIZED LOAD signs. 3. (169) Vehicles over 14 feet wide, 100 feet long, 14 feet high and/or more than 100,000 lbs. GVW must have both a lead and a rear escort vehicle with reflective Oversized Load signs on both escort and load vehicles. ***** At 14 feet high or greater the lead vehicle must have a proper height pole attached.4. (170) Vehicles over 55 ft long must have clearance lights at 20 ft intervals along both sides of this vehicle when traveling at night 5. (171) Vehicles over 13 feet, 6 inches high, 14 feet wide, and/or 80 feet long must have a warning sign and two steady yellow lights attached to the rear of the load 6. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370592

676

YMSI-20171019-42307

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370593

17

YMSI-20171019-42373

Eng stip

Please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370606

302

YMSI-20171019-42205

Crane stips7 10

Observe all stips on this permit, obey all postings, restrictions and Traffic Rules and Regs on the route during this move and on all NYC and NYS bridges and structures. Permit does not absolve permittee of any responsibility for damage done to NYC and NYS bridges due to this move. RE Cranes not permitted to travel on any NYC movable bridges, not permitted on NYC posted bridges, must occupy two lanes on bridges, are not permitted on Bklyn Bridge, are permitted on Outer Roadways on Williamsburg Bridge and not permitted on Inner Roadways, are permitted on Lower Inner Roadways on Queensboro Bridge, not permitted on Lower Outer Roadways and Upper Roadways, are permitted on Williamsburg Bridge (OR), Queensboro Bridge (LIR) or Manhattan Bridge only when wind velocity is less than 40 MPH. , permitted self-propelled cranes must move with speed less than 15 mph, when Cranes are on bridges, cranes use the lower Roadway on Manhattan Bridge, any change in the proposed cranes weight or configuration will not be allowed, must follow and obey all posted signs along the route regarding height restrictions, speed, weight, etc - as well as all NYC Traffic Rules + Regulations. Crane must be escorted by vehicles weighting not more than 5000 pounds, 100 ft behind the crane. Crane must keep 100 feet behind the flow traffic. All Vehicles including NYC police shall not be allowed within 100 ft behind and 100 ft in front of the crane on the bridge. Obtain approvals from PANYNJ, NYSDOT, TBTA, etc. Permittee is responsible for any repair for damage incurred to bridge structure caused by proposed crossing. Cranes cross City-Bridges, when traffic volume is low. This permit is only approved based on the cranes axles weight and spacing submitted to us in your OD applications. It is crane owners responsibility to adjust the standard crane axle weight (if exceeds than submitted axle weight) by removing any parts, such as Counter weight, Outrigger beams, etc to meet the submitted axle weight

370593

509

YMSI-20171019-42373

spc 5mp fc 6/25

Crane must wait for the vehicles in all lanes to be cleared in the direction of travel before it begins crossing the structures. The crane company must have escort vehicles behind the crane to keep the bridges clear of traffic until the crane has completed crossing the bridges. The permitted crane must move with speed not more than 5 mph on the bridges. It is recommended to maintain same speed and not apply brake when crane is crossing the bridges. Do not travel over the bridges if the winds exceed 30 mph. Permittee is responsible for any repair for damage incurred to the bridges structure and any appurtenances caused by proposed crossing operation. Follow all posted signs on and before the bridges such as weight, height, speed limit, etc. Follow all applicable procedures with regard to conforming to any constraints in geometric (height, length, etc.) of the roadways on their selected route and obtain any other permit if required. It is also recommended to take approval from other appropriate agencies such as Bureau of Traffic and Safety, Street(s) / Roadways, NYSDOT, TBTA, etc., and follow their suggested recommendations. No substitution will be allowed for the proposed crane, and prior approval for any modification on the transporting crane. Axles weight should be transferred to each axle as per the attached information. Please note, approval of the above mentioned crane on the subject bridges does not in any way predispose of the responsibility of Permittee for any damage done to the bridges structural integrity, due to this move.

370593

676

YMSI-20171019-42373

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370594

9

YMSI-20171019-42254

QBB

QUEENSBORO BRIDGE STIPULATION: CROSSING ONLY ALLOWED ON LOWER LEVEL (EITHER FROM EAST 59TH ST/2ND AVE IN MANHATTAN OR MAIN ENTRANCE AT QUEENS PLAZA/CRESCENT ST), INNER ROADWAY AND RIGHT LANE ONLY. NOT ALLOWED TO USE UPPER LEVEL OR OUTER ROADWAY. OBEY ALL POSTED SIGN RESTRICTIONS.

370594

303

YMSI-20171019-42254

PA-GWB

1. Speed Limit: 10 mph 2. Truck Spacing: 50 feet Clear 3. Overload Lane: Outside Curb Lane 4. No Traffic in Adjacent Lanes 5. Opposing Traffic: Unrestricted 6. Trucker shall call PA Police at 201-346-4102/4107 prior to arriving at GWB

370608

302

YMSI-20171019-42203

Crane stips7 10

Observe all stips on this permit, obey all postings, restrictions and Traffic Rules and Regs on the route during this move and on all NYC and NYS bridges and structures. Permit does not absolve permittee of any responsibility for damage done to NYC and NYS bridges due to this move. RE Cranes not permitted to travel on any NYC movable bridges, not permitted on NYC posted bridges, must occupy two lanes on bridges, are not permitted on Bklyn Bridge, are permitted on Outer Roadways on Williamsburg Bridge and not permitted on Inner Roadways, are permitted on Lower Inner Roadways on Queensboro Bridge, not permitted on Lower Outer Roadways and Upper Roadways, are permitted on Williamsburg Bridge (OR), Queensboro Bridge (LIR) or Manhattan Bridge only when wind velocity is less than 40 MPH. , permitted self-propelled cranes must move with speed less than 15 mph, when Cranes are on bridges, cranes use the lower Roadway on Manhattan Bridge, any change in the proposed cranes weight or configuration will not be allowed, must follow and obey all posted signs along the route regarding height restrictions, speed, weight, etc - as well as all NYC Traffic Rules + Regulations. Crane must be escorted by vehicles weighting not more than 5000 pounds, 100 ft behind the crane. Crane must keep 100 feet behind the flow traffic. All Vehicles including NYC police shall not be allowed within 100 ft behind and 100 ft in front of the crane on the bridge. Obtain approvals from PANYNJ, NYSDOT, TBTA, etc. Permittee is responsible for any repair for damage incurred to bridge structure caused by proposed crossing. Cranes cross City-Bridges, when traffic volume is low. This permit is only approved based on the cranes axles weight and spacing submitted to us in your OD applications. It is crane owners responsibility to adjust the standard crane axle weight (if exceeds than submitted axle weight) by removing any parts, such as Counter weight, Outrigger beams, etc to meet the submitted axle weight

370594

603

YMSI-20171019-42254

Master 6 14

Please observe and follow the following travel stipulations below as they apply to the dimensions of the vehicle/load combination in your application, accordingly, and please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures: 1. (167) Vehicles over 10ft wide must have two steady marker lights at each end of the load, amber in the front and red in the back and 1 flashing amber light on the cab and one flashing amber on the back of the vehicle. 2. (168) Vehicles over 10 ft 6 in wide and/or 65ft long must have a rear escort vehicle equipped with reflective OVERSIZED LOAD signs. 3. (169) Vehicles over 14 feet wide, 100 feet long, 14 feet high and/or more than 100,000 lbs. GVW must have both a lead and a rear escort vehicle with reflective Oversized Load signs on both escort and load vehicles. ***** At 14 feet high or greater the lead vehicle must have a proper height pole attached.4. (170) Vehicles over 55 ft long must have clearance lights at 20 ft intervals along both sides of this vehicle when traveling at night 5. (171) Vehicles over 13 feet, 6 inches high, 14 feet wide, and/or 80 feet long must have a warning sign and two steady yellow lights attached to the rear of the load 6. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370594

676

YMSI-20171019-42254

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370595

595

MS26-20171018-41904

film April 14

Film Industry vehicles are not permitted on Brooklyn Bridge. Film Industry vehicles must follow and obey all posted signs along the route regarding height restrictions, speed, weight, etc - - as well as all NYC Traffic Rules and Regulations. Film Industry vehicles must obtain all necessary permits from other agencies such as Port Authority, NYSDOT, TBTA, etc. as applicable. Permittee is responsible for any repair for damage incurred caused by proposed crossing operations. Any change in the vehicle configuration on the application is not permitted.

370596

595

MS26-20171018-41903

film April 14

Film Industry vehicles are not permitted on Brooklyn Bridge. Film Industry vehicles must follow and obey all posted signs along the route regarding height restrictions, speed, weight, etc - - as well as all NYC Traffic Rules and Regulations. Film Industry vehicles must obtain all necessary permits from other agencies such as Port Authority, NYSDOT, TBTA, etc. as applicable. Permittee is responsible for any repair for damage incurred caused by proposed crossing operations. Any change in the vehicle configuration on the application is not permitted.

370597

19

JS1D-20171020-42399

Overhang stip

THE TRANSPORT OF UTILITTY POLES-STEEL CONSTRUCTION GIRDERS AND THE LIKE-LEADS MUST INCLUDE A TOWING VEHICLE AND A CHASE VEHICLE.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST HAVE AMBER REVOLVING LIGHTS VISIBLE FROM AT LEAST 1,000 FEET.AMBER REVOLVING OR STROBE LIGHTS MUST BE PLACED ON THE POLES/GIRDERS/LEADS.AN AMBER REVOLVING LIGHT MUST BE MOUNTED ON TOP OF THE REAR OF THE POLES.A LIGHT BAR INDICATING BRAKING AND TURNING MOVEMENTS MUST BE AFFIXED TO THE REAR OF THE POLE.IT MUST INCLUDE TWO STANDARD ORANGE FLAGS AS WELL AS REFLECTIVE STRIPPING.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST BE EQUIPPED WITH SIGNS INDICATING (OVERSIZE LOAD); THESE SIGNS MUST BE AFFIXED TO THE FRONT OF THE FRONT OF THE TOWING VEHICLE AND THE REAR OF THE CHASE VEHICLE.WHEN CROSSING A STRUCTURE, MUST STAY IN FAR RIGHT LANE, AND IF VEHICLE AND LOAD IS HEAVY SHOULD BE TRAVELING 10-15 MILES PER HOUR.

370606

676

YMSI-20171019-42205

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370597

603

JS1D-20171020-42399

Master 6 14

Please observe and follow the following travel stipulations below as they apply to the dimensions of the vehicle/load combination in your application, accordingly, and please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures: 1. (167) Vehicles over 10ft wide must have two steady marker lights at each end of the load, amber in the front and red in the back and 1 flashing amber light on the cab and one flashing amber on the back of the vehicle. 2. (168) Vehicles over 10 ft 6 in wide and/or 65ft long must have a rear escort vehicle equipped with reflective OVERSIZED LOAD signs. 3. (169) Vehicles over 14 feet wide, 100 feet long, 14 feet high and/or more than 100,000 lbs. GVW must have both a lead and a rear escort vehicle with reflective Oversized Load signs on both escort and load vehicles. ***** At 14 feet high or greater the lead vehicle must have a proper height pole attached.4. (170) Vehicles over 55 ft long must have clearance lights at 20 ft intervals along both sides of this vehicle when traveling at night 5. (171) Vehicles over 13 feet, 6 inches high, 14 feet wide, and/or 80 feet long must have a warning sign and two steady yellow lights attached to the rear of the load 6. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370597

676

JS1D-20171020-42399

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370598

19

YMSI-20171019-42297

Overhang stip

THE TRANSPORT OF UTILITTY POLES-STEEL CONSTRUCTION GIRDERS AND THE LIKE-LEADS MUST INCLUDE A TOWING VEHICLE AND A CHASE VEHICLE.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST HAVE AMBER REVOLVING LIGHTS VISIBLE FROM AT LEAST 1,000 FEET.AMBER REVOLVING OR STROBE LIGHTS MUST BE PLACED ON THE POLES/GIRDERS/LEADS.AN AMBER REVOLVING LIGHT MUST BE MOUNTED ON TOP OF THE REAR OF THE POLES.A LIGHT BAR INDICATING BRAKING AND TURNING MOVEMENTS MUST BE AFFIXED TO THE REAR OF THE POLE.IT MUST INCLUDE TWO STANDARD ORANGE FLAGS AS WELL AS REFLECTIVE STRIPPING.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST BE EQUIPPED WITH SIGNS INDICATING (OVERSIZE LOAD); THESE SIGNS MUST BE AFFIXED TO THE FRONT OF THE FRONT OF THE TOWING VEHICLE AND THE REAR OF THE CHASE VEHICLE.WHEN CROSSING A STRUCTURE, MUST STAY IN FAR RIGHT LANE, AND IF VEHICLE AND LOAD IS HEAVY SHOULD BE TRAVELING 10-15 MILES PER HOUR.

370608

676

YMSI-20171019-42203

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370598

603

YMSI-20171019-42297

Master 6 14

Please observe and follow the following travel stipulations below as they apply to the dimensions of the vehicle/load combination in your application, accordingly, and please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures: 1. (167) Vehicles over 10ft wide must have two steady marker lights at each end of the load, amber in the front and red in the back and 1 flashing amber light on the cab and one flashing amber on the back of the vehicle. 2. (168) Vehicles over 10 ft 6 in wide and/or 65ft long must have a rear escort vehicle equipped with reflective OVERSIZED LOAD signs. 3. (169) Vehicles over 14 feet wide, 100 feet long, 14 feet high and/or more than 100,000 lbs. GVW must have both a lead and a rear escort vehicle with reflective Oversized Load signs on both escort and load vehicles. ***** At 14 feet high or greater the lead vehicle must have a proper height pole attached.4. (170) Vehicles over 55 ft long must have clearance lights at 20 ft intervals along both sides of this vehicle when traveling at night 5. (171) Vehicles over 13 feet, 6 inches high, 14 feet wide, and/or 80 feet long must have a warning sign and two steady yellow lights attached to the rear of the load 6. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370598

676

YMSI-20171019-42297

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370599

595

MS26-20171018-41902

film April 14

Film Industry vehicles are not permitted on Brooklyn Bridge. Film Industry vehicles must follow and obey all posted signs along the route regarding height restrictions, speed, weight, etc - - as well as all NYC Traffic Rules and Regulations. Film Industry vehicles must obtain all necessary permits from other agencies such as Port Authority, NYSDOT, TBTA, etc. as applicable. Permittee is responsible for any repair for damage incurred caused by proposed crossing operations. Any change in the vehicle configuration on the application is not permitted.

370600

17

YMSI-20171019-42370

Eng stip

Please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370607

19

YMSI-20171019-42271

Overhang stip

THE TRANSPORT OF UTILITTY POLES-STEEL CONSTRUCTION GIRDERS AND THE LIKE-LEADS MUST INCLUDE A TOWING VEHICLE AND A CHASE VEHICLE.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST HAVE AMBER REVOLVING LIGHTS VISIBLE FROM AT LEAST 1,000 FEET.AMBER REVOLVING OR STROBE LIGHTS MUST BE PLACED ON THE POLES/GIRDERS/LEADS.AN AMBER REVOLVING LIGHT MUST BE MOUNTED ON TOP OF THE REAR OF THE POLES.A LIGHT BAR INDICATING BRAKING AND TURNING MOVEMENTS MUST BE AFFIXED TO THE REAR OF THE POLE.IT MUST INCLUDE TWO STANDARD ORANGE FLAGS AS WELL AS REFLECTIVE STRIPPING.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST BE EQUIPPED WITH SIGNS INDICATING (OVERSIZE LOAD); THESE SIGNS MUST BE AFFIXED TO THE FRONT OF THE FRONT OF THE TOWING VEHICLE AND THE REAR OF THE CHASE VEHICLE.WHEN CROSSING A STRUCTURE, MUST STAY IN FAR RIGHT LANE, AND IF VEHICLE AND LOAD IS HEAVY SHOULD BE TRAVELING 10-15 MILES PER HOUR.

370755

303

YMSI-20171019-42349

PA-GWB

1. Speed Limit: 10 mph 2. Truck Spacing: 50 feet Clear 3. Overload Lane: Outside Curb Lane 4. No Traffic in Adjacent Lanes 5. Opposing Traffic: Unrestricted 6. Trucker shall call PA Police at 201-346-4102/4107 prior to arriving at GWB

370600

431

YMSI-20171019-42370

Manhat Br LL

Crane must occupy the three lanes on the L.L. of Manhattan Bridge (Close the Bridge Lower Level Roadway for 400 ft). The permitted crane must move with Crawl Speed not more than 5 mph on bridge. It is recommended to maintain same speed and not apply brake when crane is crossing the bridge. The crane must use the lower Roadway on Manhattan Bridge, this approval is not valid for the upper Roadway of Manhattan Bridge. Do not travel over the bridge if the winds exceed 30 mph. The Crane must be escorted by vehicles weighting not more than 5000 pounds, 200 ft behind the crane. The crane is responsible to keep 200 feet behind the flow traffic. All Vehicles including NYC police shall not be allowed within 200 ft behind and 200 ft in front of the crane on the bridge. Permittee is responsible for any repair for damage incurred to the bridge structure and any appurtenances caused by proposed crossing operation. Follow all posted signs on and before the bridges such as weight, height, speed limit, etc. Follow all applicable procedures with regard to conforming to any constraints in geometric (height, length, etc.) of the roadways on their selected route and obtain any other permit if required. It is also recommended to take approval from other appropriate agencies such as Bureau of Traffic and Safety, Street(s) / Roadways, NYSDOT, etc., and follow their suggested recommendations. No substitution will be allowed for the proposed crane, and prior approval for any modification on the transporting crane. Axles weight should be transferred to each axle as per the attached information. Note: approval of the above mentioned crane on the subject bridge does not in any way predispose the permittee of the responsibility for any damage done to the bridge structural integrity, due to this move.

370600

676

YMSI-20171019-42370

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370601

19

YMSI-20171019-42268

Overhang stip

THE TRANSPORT OF UTILITTY POLES-STEEL CONSTRUCTION GIRDERS AND THE LIKE-LEADS MUST INCLUDE A TOWING VEHICLE AND A CHASE VEHICLE.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST HAVE AMBER REVOLVING LIGHTS VISIBLE FROM AT LEAST 1,000 FEET.AMBER REVOLVING OR STROBE LIGHTS MUST BE PLACED ON THE POLES/GIRDERS/LEADS.AN AMBER REVOLVING LIGHT MUST BE MOUNTED ON TOP OF THE REAR OF THE POLES.A LIGHT BAR INDICATING BRAKING AND TURNING MOVEMENTS MUST BE AFFIXED TO THE REAR OF THE POLE.IT MUST INCLUDE TWO STANDARD ORANGE FLAGS AS WELL AS REFLECTIVE STRIPPING.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST BE EQUIPPED WITH SIGNS INDICATING (OVERSIZE LOAD); THESE SIGNS MUST BE AFFIXED TO THE FRONT OF THE FRONT OF THE TOWING VEHICLE AND THE REAR OF THE CHASE VEHICLE.WHEN CROSSING A STRUCTURE, MUST STAY IN FAR RIGHT LANE, AND IF VEHICLE AND LOAD IS HEAVY SHOULD BE TRAVELING 10-15 MILES PER HOUR.

370601

603

YMSI-20171019-42268

Master 6 14

Please observe and follow the following travel stipulations below as they apply to the dimensions of the vehicle/load combination in your application, accordingly, and please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures: 1. (167) Vehicles over 10ft wide must have two steady marker lights at each end of the load, amber in the front and red in the back and 1 flashing amber light on the cab and one flashing amber on the back of the vehicle. 2. (168) Vehicles over 10 ft 6 in wide and/or 65ft long must have a rear escort vehicle equipped with reflective OVERSIZED LOAD signs. 3. (169) Vehicles over 14 feet wide, 100 feet long, 14 feet high and/or more than 100,000 lbs. GVW must have both a lead and a rear escort vehicle with reflective Oversized Load signs on both escort and load vehicles. ***** At 14 feet high or greater the lead vehicle must have a proper height pole attached.4. (170) Vehicles over 55 ft long must have clearance lights at 20 ft intervals along both sides of this vehicle when traveling at night 5. (171) Vehicles over 13 feet, 6 inches high, 14 feet wide, and/or 80 feet long must have a warning sign and two steady yellow lights attached to the rear of the load 6. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370601

676

YMSI-20171019-42268

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370602

595

MS26-20171018-41901

film April 14

Film Industry vehicles are not permitted on Brooklyn Bridge. Film Industry vehicles must follow and obey all posted signs along the route regarding height restrictions, speed, weight, etc - - as well as all NYC Traffic Rules and Regulations. Film Industry vehicles must obtain all necessary permits from other agencies such as Port Authority, NYSDOT, TBTA, etc. as applicable. Permittee is responsible for any repair for damage incurred caused by proposed crossing operations. Any change in the vehicle configuration on the application is not permitted.

370603

17

YMSI-20171019-42368

Eng stip

Please observe and follow all the engineering stipulations on this OD permit and obey all postings, restrictions and Traffic Rules and Regulations along the route during this move and on all NYC and NYS bridges and elevated structures. This permit does not in any way absolve the permittee of any responsibility for damage done to NYC and NYS bridges structural integrity due to this move.

370610

19

YMSI-20171019-42276

Overhang stip

THE TRANSPORT OF UTILITTY POLES-STEEL CONSTRUCTION GIRDERS AND THE LIKE-LEADS MUST INCLUDE A TOWING VEHICLE AND A CHASE VEHICLE.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST HAVE AMBER REVOLVING LIGHTS VISIBLE FROM AT LEAST 1,000 FEET.AMBER REVOLVING OR STROBE LIGHTS MUST BE PLACED ON THE POLES/GIRDERS/LEADS.AN AMBER REVOLVING LIGHT MUST BE MOUNTED ON TOP OF THE REAR OF THE POLES.A LIGHT BAR INDICATING BRAKING AND TURNING MOVEMENTS MUST BE AFFIXED TO THE REAR OF THE POLE.IT MUST INCLUDE TWO STANDARD ORANGE FLAGS AS WELL AS REFLECTIVE STRIPPING.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST BE EQUIPPED WITH SIGNS INDICATING (OVERSIZE LOAD); THESE SIGNS MUST BE AFFIXED TO THE FRONT OF THE FRONT OF THE TOWING VEHICLE AND THE REAR OF THE CHASE VEHICLE.WHEN CROSSING A STRUCTURE, MUST STAY IN FAR RIGHT LANE, AND IF VEHICLE AND LOAD IS HEAVY SHOULD BE TRAVELING 10-15 MILES PER HOUR.

370603

509

YMSI-20171019-42368

spc 5mp fc 6/25

Crane must wait for the vehicles in all lanes to be cleared in the direction of travel before it begins crossing the structures. The crane company must have escort vehicles behind the crane to keep the bridges clear of traffic until the crane has completed crossing the bridges. The permitted crane must move with speed not more than 5 mph on the bridges. It is recommended to maintain same speed and not apply brake when crane is crossing the bridges. Do not travel over the bridges if the winds exceed 30 mph. Permittee is responsible for any repair for damage incurred to the bridges structure and any appurtenances caused by proposed crossing operation. Follow all posted signs on and before the bridges such as weight, height, speed limit, etc. Follow all applicable procedures with regard to conforming to any constraints in geometric (height, length, etc.) of the roadways on their selected route and obtain any other permit if required. It is also recommended to take approval from other appropriate agencies such as Bureau of Traffic and Safety, Street(s) / Roadways, NYSDOT, TBTA, etc., and follow their suggested recommendations. No substitution will be allowed for the proposed crane, and prior approval for any modification on the transporting crane. Axles weight should be transferred to each axle as per the attached information. Please note, approval of the above mentioned crane on the subject bridges does not in any way predispose of the responsibility of Permittee for any damage done to the bridges structural integrity, due to this move.

370603

676

YMSI-20171019-42368

Vehicle Dims

NOTE: * If the vehicle-load combination's overall dimensions and gross weight and axle weights exceed the overall dimensions on this permit and weights submitted - this permit will thus become null and void. *

370604

19

YMSI-20171019-42269

Overhang stip

THE TRANSPORT OF UTILITTY POLES-STEEL CONSTRUCTION GIRDERS AND THE LIKE-LEADS MUST INCLUDE A TOWING VEHICLE AND A CHASE VEHICLE.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST HAVE AMBER REVOLVING LIGHTS VISIBLE FROM AT LEAST 1,000 FEET.AMBER REVOLVING OR STROBE LIGHTS MUST BE PLACED ON THE POLES/GIRDERS/LEADS.AN AMBER REVOLVING LIGHT MUST BE MOUNTED ON TOP OF THE REAR OF THE POLES.A LIGHT BAR INDICATING BRAKING AND TURNING MOVEMENTS MUST BE AFFIXED TO THE REAR OF THE POLE.IT MUST INCLUDE TWO STANDARD ORANGE FLAGS AS WELL AS REFLECTIVE STRIPPING.BOTH THE TOWING VEHICLE AND THE CHASE VEHICLE MUST BE EQUIPPED WITH SIGNS INDICATING (OVERSIZE LOAD); THESE SIGNS MUST BE AFFIXED TO THE FRONT OF THE FRONT OF THE TOWING VEHICLE AND THE REAR OF THE CHASE VEHICLE.WHEN CROSSING A STRUCTURE, MUST STAY IN FAR RIGHT LANE, AND IF VEHICLE AND LOAD IS HEAVY SHOULD BE TRAVELING 10-15 MILES PER HOUR.